If the moisture content of the raw material is too high and there are no drying conditions, what can be done to use a pellet machine to make pellets? JNSHARE recommends the following based on actual production analysis: 1. Add some dry material appropriately, or replace the secondary forming hole ring die with a larger compression ratio, but you must accept that the larger the compression ratio of the pellet mill, the lower the output and the faster the wear. 2. Use a fan and pipe to suck the exhaust hole to remove water vapor. 3. Use a closed slot roller instead.
If you want to know more about our pellet machine, welcome to subscribe to our YouTube channel.