The pellet machine roller slippage will lead to poor discharge, which may cause the pellet machine to be blocked or not discharge. JNSHARE has summarized the following reasons based on years of experience:
1. The raw material is too coarse and the moisture content is high. After entering the mold, there will be mold blockage and slippage. It is recommended to control the raw material particle size and control the moisture content of the raw material entering the pellet machine between 13% and 18%.
2. The ring die bell mouth is worn flat and the roller tooth profile is seriously worn, causing the mold to not eat the material. It is recommended to replace the worn pellet machine roller in time.
If you want to know more about our pellet machine, welcome to subscribe to our YouTube channel.